Toyota Motor Corporation's
W family is a family of
RWD/
4WD transmissions built by
Aisin. Physically, these transmissions have much in common (like the
bell housing-to-body bolt pattern) with other Aisin-built transmissions, like the
Jeep AX-5 and the Toyota
G-series. The W55, W56, W57, W58, and W59 are externally and internally very similar aside from the gear ratios.
W55
This was the first of the aluminum-shelled W-series transmissions.
The W55 appears to be a base reference point for gear ratios that Toyota used to fine tune later models of the W-series.
Ratios:
- First Gear: 3.566:1
- Second Gear: 2.056:1
- Third Gear: 1.384:1
- Fourth Gear: 1.00:1
- Fifth Gear: 0.85:1
- Reverse: -4.091:1
Applications:
T50
Ratios:
- First Gear: 3.587:1
- Second Gear: 2.022:1
- Third Gear: 1.384:1
- Fourth Gear: 1.00:1
- Fifth Gear: 0.861:1
Applications:
- 1982-1983 Carina with 3A/1S/3T-E engine
- 1982 Corona with 1S engine
- 1983 Celica with 3T-E/2T-E engine
- 1984 Corolla with 2A engine
- 1980-1983 Corolla with 3T-C/2T-C/4A-C engine
- 1984-1987 Corolla with 4A-GEU/3A-U/4A-U engine
Notes:
- Comes in two varieties: 20 and 22-splines on the output shaft.
Θεματικός Τρόπος
